YT210Z Varilight 0-210VA (0-210W) Dimmable Low Voltage Lighting Transformer with Terminals but No Leads, Not Compatible With LEDs

Varilight YTZ Series Dimmable 0-210VA 210watt transformer for the low voltage circuit. Not suitable for LEDs

..................................................
This is a quality VARILIGHT transformer that was initially launched to provide a trouble-free solution when used in conjunction with any of the Intelligent Dimmers or Touch/Remote Dimmers which uses a soft start technology that extends lamp life and product life.

..................................................
The Varilight transformer, like all our products, is designed to meet the latest European Safety Legislation.

..................................................
VARILIGHT Transformers' reputation for reliability and ease of installation has grown to such an extent that they have become the preferred choice for many electricians whether or not they are to be dimmed.

..................................................
To bring an end to the uncertainty of compatibility VARILIGHT have developed this top-quality dimmable transformer at a realistic price.

..................................................

Appearance, Function and Applications

These Transformers have also many innovative features, which include:
Soft Start Technology, which gently brings lights up to full brightness when you switch on and this extends lamp life.
Auto-resetting overload protection (>200% nominal load).
Auto-resetting over-temperature protection (for T > 100�C).
Short circuit protection.
Ultra-cool running.
Captive screws for easy installation in tight spaces.
Any loading from zero up to the maximum shown on the transformer will work.
Designed in consultation with electricians for ease of cable termination and fitting.

Low Voltage Halogen Lighting
To calculate the total load for dimming, add the wattages of all the transformers you are intending to dim and choose a dimmer with a rating to suit. For optimum compatibility choose Varilight's V-Plus series dimmers.

Low Voltage Dimmable LED Lighting
Please note this Transformer is not suitable for LEDs, and works best by using Varilight's V-Plus dimmer range. If you do require a transformer/Driver for LEDs, choose YT50LZ, YT70LZ or YT70Z. 12V a.c. LEDs can be controlled using the YT50LZ transformer (up to 25W) or the YT70Z/YT70LZ transformers (up to 35W). Calculate the load by adding the wattage ratings of the LEDs and choose a dimmer with a maximum rating to suit. Check that the minimum load rating on the dimmer is sufficiently low. For optimum performance with LEDs, choose Varilight V-Pro or V-Com series dimmers. For 12V d.c. LED lighting, e.g. LED strip, use part number YT40DC12.

..................................................
-Height (mm): 38.5

-Width(mm): 52.5

-Length (mm): 167

Limitations

Install in a well-ventilated location, away from heat sources.
Do not connect the output cables of one transformer to those of another.
To achieve even light levels between bulbs use identical cable lengths on the output side of the transformer(s).
Dimmer switches should be located on the primary (input) side of the transformer.
If you require a longer cable than supplied (for transformers with integral cables) then use a proprietary terminal block to connect a suitable additional cable, ensuring no bare wires protrude from the terminals.
For transformers located in the ceiling cavity always observe the recommended minimum distances.
A minimum distance of 30cm should be maintained between the transformer and the bulb, or another transformer.
If many bulbs are being controlled from one transformer, use a terminal block to distribute the wiring.
Bulbs should always be connected to the transformer in parallel. Do not connect bulbs in series with one bulb linked to another.
Position the input and output wires in such a way that they do not cross.

..................................................

Product Instructions & Manuals

-Transformer Leaflet YTZ002 PDF-