XDYFODS.PD Varilight Flex Outlet 16 Amp with Cable Clamp Screwless Primed and Ready to Paint With Polished Chrome Flex Outlet

Varilight 1 Gang, 16 Amp, Flex Outlet Plate with Cable Clamp, on a Single Plate, for use as a neat way for hiding cables, sending cables through walls, and to connect to appliances.

..................................................
VARILIGHT products have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The Varilight product, like all our products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct product for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.
..................................................

Appearance, Function and Applications

What paint can I use? - You can use any paint, which will give you a variety of finishes.

How many coats will it typically take to finish them well? - Varilight recommend 3 coats for emulsion, which can be applied by brush or roller, and at least 1 coat for spray paint.

Will these conform to British Standards? - All our products conform to the BSEN Standards.

Can I remove the paint once painted - if so how? - You can't remove the paint unless you're confident in sanding it off with sandpaper or similar, but you can over-paint the plate if you decide to change your wall colour.

Do I still get a warranty once painted? - Warranty is for the working parts of the accessories, but not on the finish that has been applied.

What colour do they come unfinished? - They are a slightly creamy off white when they're unfinished.
..................................................
The Flex Outlet Plates can be used in a number of different environments, and applications, for many different types of appliances e.g. an electric towel rail. Make sure there is no contact with water, wet areas should be avoided, and the Flex Outlet to be put outside of these rooms.
..................................................

Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty.
..................................................

Product Instructions & Manuals


- Wiring Accessories PDF
- Screwless Fitting PDF