XDOWBS-S2W Single 25mm Deep Surface Mounting Wall Box with Metal Knock-Out Box Kilnwood Classic Wood Dark Oak

Single 25mm Deep Surface Mounting Wall Box with Metal Knock-Out Box.

..................................................
The manufacturers of these wood products are a British company who have been designing, manufacturing and distributing electrical wiring accessories for over 25 years, not only for the UK, but internationally too. They understand design is in the detail and so offer a broad range of accessories to compliment any interior.
..................................................
These Wooden Ranges are manufactured from only the best sustainable hardwoods by their skilled craftsmen. They take the environmental responsibility seriously and only source timber from well managed temperate forests and do not use any tropical timbers. Some of the wood products are unfinished (without a finish applied) these darken naturally over time. Other wood ranges have finishes applied to them, for example, Dark Oak and Mahogany. Please remember these are natural products with varying wood grain as every tree is slightly different to one another, which gives an almost bespoke and beautiful quality with artistic uniqueness.
..................................................
To reduce their impact further they heat the workshop with the waste sawdust and shavings reducing massively what would have been sent to landfill.
..................................................
They strive to offer ranges that are more than just out of the box standard! They like to consider that when you purchase one of their products you are fitting a piece of wall furniture, something that contributes to the overall design of the room.
..................................................
It is important to select the correct product for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.

Appearance, Function and Applications

Single 25mm Deep Surface Mounting Wall Box with Metal Knock-Out Box
..................................................

Limitations

Remember to not overtighten this product or the natural wood will crack and warranty will be void.
..................................................
This product is not waterproof and should not be used externally.
..................................................

Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may discolour or warp. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, from the above or over tightening to the wall, it will void the product warranty.
..................................................

Product Instructions & Manuals


- Wiring Accessories PDF