XDY9S.AC Varilight 4 Gang 10 Amp Switch Screwless Antimicrobial/Antiviral Unlaquered Copper Cu29

Varilight 4 Gang, for either 1 or 2 way circuits, 10 Amp rocker switch, on a Double Plate, for all lighting types.

..................................................
VARILIGHT Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The Varilight switch, like all our products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.
..................................................

Appearance, Function and Applications

The rocker switch is rectangular with a central fulcrum, press the bottom of the rocker switch to turn on, and the top of the rocker switch to turn off, an audible click will occur when turning on/off the switch.
..................................................
Our standard rocker switches are suitable for controlling mains and low voltage lighting, halogen, incandescent GLS, LEDs and any other lighting that does not require dimming.
..................................................
They are also suitable for either 1 way, or 2 way circuits, i.e. where the same lights are controlled by 2 seperate switches. If the lighting circuit is controlled by three switches, in seperate locations then one of the switches in the circuit must be an Intermediate Switch with four terminals enabling you to link all three switches together.
..................................................
Antimicrobial copper works alongside routine cleaning and sanitisation procedures to reduce the spread of infection, making this range ideal for healthcare and domestic environments.
Exposure to copper destroys viruses and bacteria completely and irreversibly.
Germs die rapidly on copper, which keeps working 24/7, in between regular cleans. Our Tarnishing Antimicrobial copper range is made from solid copper so this effect won’t reduce overtime.
Normal tarnishing or wear of Antimicrobial Copper surfaces will not impair the antiviral effectiveness of the product.

..................................................
Although the Antimicrobial/Antiviral Copper range was designed to manage germs on contact, this range can also be used in properties requiring a distressed finish, as they develop a natural patina. This patina can be reset by polishing with Brasso or similar, which removes all patina effects and allows you to add a different distressed finish to your own taste. Alternatively, if you require a polished copper finish, then regular cleaning with Brasso, or a similar product, is best.
..................................................
The VARILIGHT Antimicrobial/Antiviral Copper range is made from un-lacquered and un-coated solid copper and comes complete with solid copper switch rockers to ensure maximum Antimicrobial/Antiviral efficacy and carries the Cu29 logo. Clip on faceplates remove the need for visible fixing screws, providing a flat surface to facilitate cleaning. Normal tarnishing of Antimicrobial/Antiviral copper surfaces will not impair the antibacterial effectiveness of the product.
Please Note: These products are Anti-Microbial Unlaquered Copper, therefore they tarnish as expected. If you prefer a lacquered version, look at Urban Polished copper
..................................................

Limitations

This switch is not waterproof.
..................................................
If you would prefer a dimmer instead, then choose one of the following dimmers: if dimming LEDs choose either the JDYP401S.AC (1 Gang) or JDYP252S.AC (2 Gang) V-Pro series dimmer.
..................................................

Cleaning

Please follow the instructions on cleaning below, which is also shown in the instructions provided with the product. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty.
..................................................
Cleaning and sanitisation

This product will develop a natural patina. Routine cleaning and sanitisation procedures must continue to be implemented to reduce the potential for infection and to keep the Antimicrobial/Antiviral Copper Alloy surface free of dirt and grime that could prevent contact with the surface and inhibit Antimicrobial/Antiviral performance. The appropriate cleaning agent depends on the type of soiling and the measure of sanitisation required. To remain effective the surface must not be coated in any way. Do not wax, paint, lacquer, varnish, or otherwise coat this product. Normal tarnishing or wear of Antimicrobial/Antiviral Copper Alloy surfaces will not impair the antibacterial effectiveness of the product. An effective cleaning agent for use on Antimicrobial/Antiviral copper product is citric acid. Apply a small amount to a polishing cloth and lightly wipe the affected area.
..................................................
This cleaning method with Citric Acid will remove bacteria build up. If you require the natural patina/tarnishing/distressed effect to be removed, this can be achieved by polishing with Brasso or similar, which will bring the product back to an original natural polished copper metal. Be sure not to use a cloth that is abrasive, unless you require a brushed effect.
..................................................

Product Instructions & Manuals


- Antimicrobial/Antiviral Copper Accessories PDF
- Wiring Accessories PDF
- Screwless Fitting PDF